How to operate a rotorless vulcanizer
Medical Products Assembly Machine:
Medical products assembly machine is generally used to assemble parts of medical products to be one whole set, like Syringe Assembly Machine to assemble syringe barrel, plunger, gasket and ready needle, or Needle Assembly Machine to assemble needle cap, needle hub and cannula.
Advantages of medical products assembly machine:
1. Easy operation
2. Highly automatic
3. High production capacity
If you have any question, please feel free to contact us. Your visit to our factory will also be much welcomed. Looking forward to hearing from you soon!
Medical Products Assembly Machine Medical Products Assembly Machine,Syringe Assembly Machine,Needle Assembly Machine Yuhuan Zhengri Technology Co., Ltd. , http://www.syringemachine.com
1. Open the red button behind the vulcanometer, start the vulcanometer and turn on the computer and air compressor (air compressor is normally open)
2. In accordance with the experimental requirements, set the experimental temperature on the control panel of the vulcanizer and press ENTER to confirm.
3. Open the operation program of the rotorless vulcanizer on the desktop of the computer. Set the running time and torque range on the “parameter setting†of the program, and the data is automatically saved as “txt†file.
4. Create a new folder in the E drive. The “Storage File†in the program settings is the address where the data is saved and the data is placed in its own folder.
5. After the temperature reaches the experimental temperature, place a 10cm x 10cm cellophane on the mold cavity, place the glue on the glass paper, and place a piece of cellophane on the glue. Then click the "Start" button to start the experiment.
6. Save the data after the experiment and clean the mold cavity.
Note: No.1 and No.2 vulcanizers have a rotor vulcanizer, No. 3 vulcanizers have a rotorless vulcanometer, and a rotor vulcanometer has a large torque, which is suitable for rubbers with a large viscosity, and for rubbers with a low viscosity, such as Silicone rubber, liquid rubber, etc. are suitable for the No. 3 rotorless vulcanizer with less torque.
Shandong Derek Instrument Co., Ltd.
