Pulse Valve Diaphragm The pulse valve diaphragm is a whole high quality rubber diaphragm, which is installed with the riveting head which is used to plug the compressed air pipe or the outlet of the plugging valve. The diaphragm is a whole high quality rubber diaphragm with the hole of the discharge and unloading and the bolt holes with fixed support. It is the key control part in the electromagnetic pulse valve. Working principle The pulse valve diaphragm divides the pulse valve into two air chambers. When the electromagnetic pulse valve is connected to the clean compressed air in the dust cleaning system of the pulse Bag Filter, the compressed air passes through the throttle hole and enters the rear air chamber. At this time the pressure of the rear air chamber is close to the outlet of the valve, the pulse valve is in the closed state and the pulse control instrument is output. The signal is to move the armature of the pulse valve, the gas chamber is open after the valve, and the air chamber is opened, the rear air chamber is quickly lost, the diaphragm is moved back, the compressed air is blown through the outlet of the valve, the pulse valve is in the open state, the output of the pulse control device disappears, the electromagnetic first lead armature of the pulse valve is reset, and the rear air chamber is deflated through the hole. When the pressure rises in the rear air chamber, the pulse valve diaphragm is close to the outlet of the valve, the pulse valve is in the closed state, the injection stop is stopped, and the size of the long and short gas amount of the injection time is controlled by the controller. technical requirement The pulse valve diaphragm is a flexible mechanism that requires constant opening and closing to control air circulation, and requires good flexibility, and requires as high as possible sealing. Therefore, the material of the diaphragm is directly related to the life and use of the diaphragm, in other words, the pulse valve membrane. The good or bad of the film directly affects the working stability of the dust cleaning system of the pulse bag filter, and is directly related to the cost of the use of the dust removal equipment. The ordinary diaphragm has the promise of the service life or the number of action, and the use of the high quality pulse valve diaphragm can directly reduce the cost of the use of the dust removal equipment. structure performance It is made up of two or more layers of glue. According to its shape, the method of membrane pressure is divided. According to the requirements, we can make different kinds of rubber and different fabric diaphragms. The properties of the blend of butadiene rubber and polysulfide rubber for diaphragm, the properties of the adhesive used in the canvas disc diaphragm (often called diaphragm), and the characteristics of some silicone rubber, fluororubber and chlorohydrin rubber film developed in recent years are explained as follows. The working temperature range and pressure range of the diaphragm depend on the glue type, fabric and structure. The diaphragm can work at -50~100 centigrade and 0.4~0.8MPa, and fluorine rubber and silicone rubber diaphragm can work at -80~232 degrees Celsius. The chlorohydrin rubber diaphragm can work under 0.4~0.8MPa pressure. It has good tightness, aging resistance and life expectancy.
Pulse Valve Diaphragm
Pulse Valve Diaphragm,Filter Pulse Valve Diaphragm,Pulse Jet Valve Diaphragm ,Pulse Valve Diaphragm For Gas Regulator
 