Structure: SH pump using the level of open, with a double suction impeller. suction pipe , discharge pipe and the lower part of the pump body casting together, do not need to remove the pipeline and the motor will be able to easily check the pump rotor parts.
Model specification: 10 SH ---13 A 10:Suction diameter(inch) SH:Single stage double suction level of open 13:The number is integer divisible by 10 A:Impeller's cutting time. The order is A B ...
Shaft Sealing: The pump adopts soft packing, the sleeve can be replaced with the shaft seal part, can also according to user's requirements with mechanical seal.
Transmission: Pump is driving through the flexible coupling by the motor , from the drive end, the pump is counter clockwise rotation (according to the special order supply clockwise rotation of the pump).
Bearing and balance device: Bearing body (rolling bearing or sliding bearing) installed at both ends of the pump shaft, the axial force balance by the double suction impeller , the residual axial force balance by the rolling bearing . Rolling bearings with grease lubrication, sliding bearing with thin oil lubrication.
Materials: Casing: cast iron ; Shaft sleeve: cast iron  ;  Sealing Ring: cast iron  ; Shaft: high quality carbon steel;Impeller: Cast iron, cast steel; According to the transmission medium is different, the pump materials and models are also different. 1. Clean liquid without solid particles, SH Type pump all material is cast iron, SHG type pump body is cast steel , carbon steel and stainless steel. Rotor parts is carbon steel or stainless steel. 2.Sea water and other corrosive media, SHN type of pump body material is nickel cast iron, SHF type pump body material is stainless steel. This type of pump when the matching motor power in the following 110KW with a common base. If the Common base is greater than 100KW, the order must be explained. if users have special requirements for motor pump , please state in the order.Â
SH,SHG STRUCTURE CHART:
Using rolling bearing:
101
102
121
201
202
211
Pump casing
Pump cover
Pump sealing ring
Pump shaft
impeller
Shaft sleeve
Using sliding bearing:
101
102
121
201
202
211
Pump casing
Pump cover
Pump sealing ring
Pump shaft
impeller
Shaft sleeve
SH Installation drawing:
SHG type pump outline drawing Â
Â
Forging is a kind of pressure of forging machinery
for metal blank, make its produce plastic deformation in order to obtain
certain mechanical properties, a certain shape and size of forging processing
method, forging, forging and stamping) of one of the two part. By forging can
eliminate the metal smelting process of as-cast loose defects, such as
optimizing the microstructure, at the same time because of the intact metal
flow, forging generally better than that of the same material on the mechanical
properties of the castings. Related mechanical load is high, the working
conditions of severe important parts, in addition to a simpler shape rolling
plate, profile or welding parts are available, use forging more.
We can supply big range of such Brass Forging
parts.
B.
Main particulars
MAIN
PARTICULARS
Material
for product
brass
Standard
ASTM, ASME, DIN, JIS,
ISO, BS, API, EN
Certificate
ISO9001,
BV
Dimension
As
per drawing, as large as we can
Processing
Forging+blasting+Machining
Finishing
surface
Machined
surface with oil, blasting and painting, anodize, polishing, powder painting,
electrophoretic coating-
