Seaflo Electric Water Pump Motor Price
Die casting(Aluminium Die Casting) is a metal casting process that is characterized by forcing molten metal under high pressure into a mold cavity. The mold cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mold during the process. Most die castings are made from non-ferrous metals, specifically zinc, copper, aluminium, magnesium, lead, pewter and tin based alloys. Depending on the type of metal being cast, a hot- or cold-chamber machine is used.
The casting equipment and the metal dies represent large capital costs and this tends to limit the process to high volume production. Manufacture of parts using die casting is relatively simple, involving only four main steps, which keeps the incremental cost per item low. It is especially suited for a large quantity of small to medium-sized castings, which is why die casting produces more castings than any other casting process.[1] Die castings are characterized by a very good surface finish (by casting standards) and dimensional consistency. Aluminum Die Casting, Die Casting Components, Pneumatic Zinc Die Casting, Zin Die Casting,Aluminium Die Casting NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com
SEAFLO Electric Water Pump Motor Price
800 GPH
Product Description
1. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
2. Totally submersible and ignition protected.
3. To all existing safety standards.
4. Water cooled motors for long life, with anti airlock design and moisture tight seals.
5. Snap-lock strainer base for easy installation and removal, and silent vibration free running
6. Includes comprehensive user manual with installation instructions and wiring diagram
Application
Typically used in boat hulls / bilges
Bait tanks
Ponds, pools, spas
Other applications where you have to remove water from
Note: These pumps are designed for intermittent use only, NOT designed for continuous use
How a Bilge Pump Works
Non-automatic bilge pumps offer traditional operation activated by a float or panel switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. They are designed to fit in the lowest part of the bilge and only require discharge pipe work and electricity supply.
Backed SEAFLO's 1-Year Warranty!
Model
Flow rate
Volts
Current
Head
Wire lead
Outlet Dia
N.W/G.W
SFBP1-G350-03
350 GPH
12V
2.0A
3.0 m
1 m
19 mm/3/4"
0.37/0.46 kg
SFBP1-G600-03
600 GPH
12V
3.0A
3.5 m
1 m
19 mm/3/4"
0.37/0.46 kg
SFBP1-G800-03
800GPH
12V
3.5A
4.0 m
1 m
19 mm/3/4"
0.37/0.46 kg
Two variants are pore-free die casting, which is used to eliminate gas porosity defects; and direct injection die casting, which is used with zinc castings to reduce scrap and increase yield.