Model NO.: GDF
Structure: Steel
Magnetic: Neodymium Magnet NdFeB N38sh
Characteristic: Permanent Magnet Synchronous Generator
Shaft Quantity: Single Shaft or Double Shaft
Weight Range: 30kg ~ 13 Ton
Trademark: GREEF
Transport Package: Plywooden Case
Specification: Depnds on the generator size
Origin: China
HS Code: 85016100
Model NO.: GDF
Structure: Steel
Magnetic: Neodymium Magnet NdFeB N38sh
Characteristic: Permanent Magnet Synchronous Generator
Shaft Quantity: Single Shaft or Double Shaft
Weight Range: 30kg ~ 13 Ton
Trademark: GREEF
Transport Package: Plywooden Case
Specification: Depnds on the generator size
Origin: China
HS Code: 85016100
10kW 100kW 1mW Permanent Magnet alternator, low RPM PMA PMG, water powered permanent magnetic generator
GreeF company supply variety of permaent magent generators which is suitable for driven by following equipment to Â
- Driven by Wind Power --------Wind turbine
- Driven by Hydro Power ------- Water turbine, Tidal, Ocean power
- Dirven by  perpetual motion machine
- Dirven by test plantÂ
- Driven the permanent magnet generator and make it rotate then it can generate powerÂ
Â
Advantage
 1. Rare earth Nd-Fe-B permanent magnet generator. energy save energy more than 15% than ordinary generators.
2. Permanent magnet rotor structure, no excitation winding, no carbon brushes, no slip rings, no need gear box.Simple structure, reliable ,durable and Maintenance free.
3. Multi poles design, improve the frequency and efficiency of rectifiers and inverters. Saving cost .
4. Started directly, without control cabinet, replace the asynchronous motor totally.
5. H class insulation, vacuum pressure impregnation.
6. Use SKF bearings
7. Power factor close to 1,no need add power factor compensation equipment.
8. Small heat, aslo can add fan cooling or water cooling
9. Long life time >20years, Strong rotors, could run at high speed.24hours 365days running.
10. Energy-saving, return investment within 1-2years.
Technical Data
Generator type : Pemanent Magnet  Synchronous   Direct drive   3Phase  AC
Customized Voltage, Speed, Power ,Frequency.
Customized shaft size ,Spline shaft, biaxial extension, flange can be used.
Varity structures design : vertical axes, horizontal axes, internal rotor, external rotor, plate type.                   Â
Power |
AC voltage |
speed |
poles |
frequency |
Rated torque |
current |
efficiency |
weight |
2.5kw |
400V |
273rpm |
22 |
50Hz |
88Nm |
16.9AÂ |
93.80% |
72kg |
5 kw |
400V |
273rpm |
22 |
50Hz |
176Nm |
16.9AÂ |
93.80% |
122kg |
8 kw |
400V |
250rpm |
24 |
50Hz |
306Nm |
16.9AÂ |
93.80% |
186kg |
16 kw |
400V |
500rpm |
12 |
50Hz |
306Nm |
16.9AÂ |
93.80% |
186kg |
12 kw |
400V |
250rpm |
24 |
50Hz |
460Nm |
16.9AÂ |
93.80% |
260kg |
24 kw |
400V |
500rpm |
12 |
50Hz |
460Nm |
16.9AÂ |
93.80% |
260kg |
15 kw |
400V |
214rpm |
28 |
50Hz |
670Nm |
16.9AÂ |
93.80% |
320kg |
30 kw |
400V |
428rpm |
14 |
50Hz |
670Nm |
16.9AÂ |
93.80% |
320kg |
20 kw |
400V |
187.5rpm |
32 |
50Hz |
1020Nm |
16.9AÂ |
93.80% |
420kg |
40 kw |
400V |
375rpm |
16 |
50Hz |
1020Nm |
16.9AÂ |
93.80% |
420kg |
30 kw |
400V |
187.5rpm |
32 |
50Hz |
1530Nm |
16.9AÂ |
93.80% |
720kg |
60 kw |
400V |
375rpm |
16 |
50Hz |
1530Nm |
16.9AÂ |
93.80% |
720kg |
35 kw |
400V |
125rpm |
48 |
50Hz |
2700Nm |
16.9AÂ |
93.80% |
1260kg |
70 kw |
400V |
250rpm |
24 |
50Hz |
2700Nm |
16.9AÂ |
93.80% |
1260kg |
105 kw |
400V |
375rpm |
16 |
50Hz |
2700Nm |
16.9AÂ |
93.80% |
1260kg |
140 kw |
400V |
500rpm |
12 |
50Hz |
2700Nm |
16.9AÂ |
93.80% |
1260kg |
80 kw |
400V |
125rpm |
48 |
50Hz |
6120Nm |
16.9AÂ |
93.80% |
1680kg |
160 kw |
400V |
250rpm |
24 |
50Hz |
6120Nm |
16.9AÂ |
93.80% |
1680kg |
200 kw |
400V |
375rpm |
16 |
50Hz |
6120Nm |
16.9AÂ |
93.80% |
1680kg |
320 kw |
400V |
500rpm |
12 |
50Hz |
6120Nm |
16.9AÂ |
93.80% |
1680kg |
100 kw |
400V |
125rpm |
48 |
50Hz |
7650Nm |
16.9A |
93.80% |
2800kg |
200 kw |
400V |
250rpm |
24 |
50Hz |
7650Nm |
16.9AÂ |
93.80% |
2800kg |
300 kw |
400V |
375rpm |
16 |
50Hz |
7650Nm |
16.9AÂ |
93.80% |
2800kg |
400 kw |
400V |
500rpm |
12 |
50Hz |
7650Nm |
16.9AÂ |
93.80% |
2800kg |
150 kw |
400V |
125rpm |
48 |
50Hz |
11500Nm |
16.9AÂ |
93.80% |
3900kg |
300 kw |
400V |
250rpm |
24 |
50Hz |
11500Nm |
16.9AÂ |
93.80% |
3900kg |
450 kw |
400V |
375rpm |
16 |
50Hz |
11500Nm |
16.9AÂ |
93.80% |
3900kg |
600 kw |
400V |
500rpm |
12 |
50Hz |
11500Nm |
16.9AÂ |
93.80% |
3900kg |
200 kw |
400V |
125rpm |
42 |
50Hz |
15300Nm |
16.9AÂ |
93.80% |
5200kg |
600 kw |
400V |
375rpm |
14 |
50Hz |
15300Nm |
16.9AÂ |
93.80% |
5200kg |
     Â
Drawing Sample
Â
Â
Pictures
Â
Â
1. Alternator for wind generator use inner foam protection outer Plywooden case .
2. Pakage size and weight please refer to our sales.
3. Shipping  by sea with FCL LCL or by air .
If you have any request in package and shipping please tell our sales we will do according to your request.
Â
Â
Â
Generators are free 3 years warranty, All lifelong  technical support and part cost supply.
Â
(1) The warranty period is start from the date of shipment which show on the bill of loading or air waybill.
(2) Free maintenance services during the warranty period the cost involved be borne by the company, do not charge a fee to customers, free warranty if any damage outside the warranty period, the company will charge a fee for labor costs and materials.
(3) the warranty period, company's quality problems caused by the maintenance of the freight borne by the company, if not under warranty or man-made damage, the freight charges by the customer.
Â
Â
If you have any questions, please do not hesitate to contact us.
You can directly contact John for any any questions!Â
Â
Mr John Huang
Â
Â
Mobile phone: +86-13299938899
Â
Â
Â
10kW 100kW 1mW Permanent Magnet alternator, low RPM PMA PMG, water powered permanent magnetic generator
GreeF company supply variety of permaent magent generators which is suitable for driven by following equipment to Â
- Driven by Wind Power --------Wind turbine
- Driven by Hydro Power ------- Water turbine, Tidal, Ocean power
- Dirven by  perpetual motion machine
- Dirven by test plantÂ
- Driven the permanent magnet generator and make it rotate then it can generate powerÂ
Â
Advantage
 1. Rare earth Nd-Fe-B permanent magnet generator. energy save energy more than 15% than ordinary generators.
2. Permanent magnet rotor structure, no excitation winding, no carbon brushes, no slip rings, no need gear box.Simple structure, reliable ,durable and Maintenance free.
3. Multi poles design, improve the frequency and efficiency of rectifiers and inverters. Saving cost .
4. Started directly, without control cabinet, replace the asynchronous motor totally.
5. H class insulation, vacuum pressure impregnation.
6. Use SKF bearings
7. Power factor close to 1,no need add power factor compensation equipment.
8. Small heat, aslo can add fan cooling or water cooling
9. Long life time >20years, Strong rotors, could run at high speed.24hours 365days running.
10. Energy-saving, return investment within 1-2years.
Technical Data
Generator type : Pemanent Magnet  Synchronous   Direct drive   3Phase  AC
Customized Voltage, Speed, Power ,Frequency.
Customized shaft size ,Spline shaft, biaxial extension, flange can be used.
Varity structures design : vertical axes, horizontal axes, internal rotor, external rotor, plate type.                   Â
Power |
AC voltage |
speed |
poles |
frequency |
Rated torque |
current |
efficiency |
weight |
2.5kw |
400V |
273rpm |
22 |
50Hz |
88Nm |
16.9AÂ |
93.80% |
72kg |
5 kw |
400V |
273rpm |
22 |
50Hz |
176Nm |
16.9AÂ |
93.80% |
122kg |
8 kw |
400V |
250rpm |
24 |
50Hz |
306Nm |
16.9AÂ |
93.80% |
186kg |
16 kw |
400V |
500rpm |
12 |
50Hz |
306Nm |
16.9AÂ |
93.80% |
186kg |
12 kw |
400V |
250rpm |
24 |
50Hz |
460Nm |
16.9AÂ |
93.80% |
260kg |
24 kw |
400V |
500rpm |
12 |
50Hz |
460Nm |
16.9AÂ |
93.80% |
260kg |
15 kw |
400V |
214rpm |
28 |
50Hz |
670Nm |
16.9AÂ |
93.80% |
320kg |
30 kw |
400V |
428rpm |
14 |
50Hz |
670Nm |
16.9AÂ |
93.80% |
320kg |
20 kw |
400V |
187.5rpm |
32 |
50Hz |
1020Nm |
16.9AÂ |
93.80% |
420kg |
40 kw |
400V |
375rpm |
16 |
50Hz |
1020Nm |
16.9AÂ |
93.80% |
420kg |
30 kw |
400V |
187.5rpm |
32 |
50Hz |
1530Nm |
16.9AÂ |
93.80% |
720kg |
60 kw |
400V |
375rpm |
16 |
50Hz |
1530Nm |
16.9AÂ |
93.80% |
720kg |
35 kw |
400V |
125rpm |
48 |
50Hz |
2700Nm |
16.9AÂ |
93.80% |
1260kg |
70 kw |
400V |
250rpm |
24 |
50Hz |
2700Nm |
16.9AÂ |
93.80% |
1260kg |
105 kw |
400V |
375rpm |
16 |
50Hz |
2700Nm |
16.9AÂ |
93.80% |
1260kg |
140 kw |
400V |
500rpm |
12 |
50Hz |
2700Nm |
16.9AÂ |
93.80% |
1260kg |
80 kw |
400V |
125rpm |
48 |
50Hz |
6120Nm |
16.9AÂ |
93.80% |
1680kg |
160 kw |
400V |
250rpm |
24 |
50Hz |
6120Nm |
16.9AÂ |
93.80% |
1680kg |
200 kw |
400V |
375rpm |
16 |
50Hz |
6120Nm |
16.9AÂ |
93.80% |
1680kg |
320 kw |
400V |
500rpm |
12 |
50Hz |
6120Nm |
16.9AÂ |
93.80% |
1680kg |
100 kw |
400V |
125rpm |
48 |
50Hz |
7650Nm |
16.9A |
93.80% |
2800kg |
200 kw |
400V |
250rpm |
24 |
50Hz |
7650Nm |
16.9AÂ |
93.80% |
2800kg |
300 kw |
400V |
375rpm |
16 |
50Hz |
7650Nm |
16.9AÂ |
93.80% |
2800kg |
400 kw |
400V |
500rpm |
12 |
50Hz |
7650Nm |
16.9AÂ |
93.80% |
2800kg |
150 kw |
400V |
125rpm |
48 |
50Hz |
11500Nm |
16.9AÂ |
93.80% |
3900kg |
300 kw |
400V |
250rpm |
24 |
50Hz |
11500Nm |
16.9AÂ |
93.80% |
3900kg |
450 kw |
400V |
375rpm |
16 |
50Hz |
11500Nm |
16.9AÂ |
93.80% |
3900kg |
600 kw |
400V |
500rpm |
12 |
50Hz |
11500Nm |
16.9AÂ |
93.80% |
3900kg |
200 kw |
400V |
125rpm |
42 |
50Hz |
15300Nm |
16.9AÂ |
93.80% |
5200kg |
600 kw |
400V |
375rpm |
14 |
50Hz |
15300Nm |
16.9AÂ |
93.80% |
5200kg |
     Â
Drawing Sample
Â
Â
Pictures
Â
Â
1. Alternator for wind generator use inner foam protection outer Plywooden case .
2. Pakage size and weight please refer to our sales.
3. Shipping  by sea with FCL LCL or by air .
If you have any request in package and shipping please tell our sales we will do according to your request.
Â
Â
Â
Generators are free 3 years warranty, All lifelong  technical support and part cost supply.
Â
(1) The warranty period is start from the date of shipment which show on the bill of loading or air waybill.
(2) Free maintenance services during the warranty period the cost involved be borne by the company, do not charge a fee to customers, free warranty if any damage outside the warranty period, the company will charge a fee for labor costs and materials.
(3) the warranty period, company's quality problems caused by the maintenance of the freight borne by the company, if not under warranty or man-made damage, the freight charges by the customer.
Â
Â
If you have any questions, please do not hesitate to contact us.
You can directly contact John for any any questions!Â
Â
Mr John Huang
Â
Â
Mobile phone: +86-13299938899
Â
Â
Â
The Laser Lens occupies an important position in the laser system, and the change of the laser path depends on the refraction of the lens.Laser Lenses are used to focus collimated light from laser beams in a variety of laser applications. Laser Lenses are designed to focus light in several different ways depending on the lens type, such as focusing down to a point, a line, or a ring. Many different lens types are available in a range of wavelengths.The laser lens occupies an important position in the laser system, and the change of the laser path depends on the refraction of the lens.Laser Lenses are used to focus collimated light from laser beams in a variety of laser applications. Laser Lenses are designed to focus light in several different ways depending on the lens type, such as focusing down to a point, a line, or a ring. Many different lens types are available in a range of wavelengths.
Laser Lens
Laser Lens,Laser Focus Lens,Laser Reflector,Znse Co2 Laser Lens
ShiJiaZhuang Jing Hang Laser Technology Co., LTD. , http://www.jhlasertube.com