High Strengthened Torque Rod Bushing:

1). OEM: 1135080

           SIZE: 52*92*85mm;     WEIGHT: 1.27KG

2). QUALITY: Grade 8.8/ Grade 10.9 / Grade 12.9;

3). SURFACE PROTECTION:

     Zinc phosphate + Protective Oil (Black / Grey),

     Zinc Galvanize (Silver / Yellow) / Dacromaet (Silver);

4). Replace for: DAF Truck, Volvo Truck

5). SPECIAL SERVICE: 

     Can be made according to customers' drawings and/or samples;

6). PACKAGE:  

     Inner packing: 12 pcs / box    G.W.: 30 - 35kg/ctn

     Outer packing: Standard neutral carton box;

     We can also provide carton boxes fastened with pallet

     according to customers' requirements.

YOUBISHENG MACHINERY INDUSTRIAL CO,.LTD.

We are special and reliable manufacturer of V stay, torque rod, torque rod bush, repair kits, rubber support, crown gear pinion, drive shaft, axle shaft, differential assembly(differential case, gear, input/cross shaft etc.) and other truck parts.

High Strengthened Torque Rod Bushing:

1). OEM: 1135080

           SIZE: 52*92*85mm;     WEIGHT: 1.27KG

2). QUALITY: Grade 8.8/ Grade 10.9 / Grade 12.9;

3). SURFACE PROTECTION:

     Zinc phosphate + Protective Oil (Black / Grey),

     Zinc Galvanize (Silver / Yellow) / Dacromaet (Silver);

4). Replace for: DAF Truck, Volvo Truck

5). SPECIAL SERVICE: 

     Can be made according to customers' drawings and/or samples;

6). PACKAGE:  

     Inner packing: 12 pcs / box    G.W.: 30 - 35kg/ctn

     Outer packing: Standard neutral carton box;

     We can also provide carton boxes fastened with pallet

     according to customers' requirements.

YOUBISHENG MACHINERY INDUSTRIAL CO,.LTD.

We are special and reliable manufacturer of V stay, torque rod, torque rod bush, repair kits, rubber support, crown gear pinion, drive shaft, axle shaft, differential assembly(differential case, gear, input/cross shaft etc.) and other truck parts.

Forced Circulation Pump

The forced circulation pump does not rely on the centrifugal force of the impeller to the liquid, but uses the thrust of the rotating impeller blades to make the sent liquid flow along the direction of the pump axis. When the pump shaft is driven by the motor to rotate, because the blade has a certain helix angle with the axis of the pump shaft, a thrust (or lift) is generated on the liquid, and the liquid is pushed out and discharged along the discharge pipe. When the liquid is pushed out, a partial vacuum is formed at the original position, and the liquid outside will be sucked into the impeller along the inlet pipe under the action of atmospheric pressure. As long as the impeller keeps rotating, the pump can continuously suck in and discharge liquid. The forced circulation pump works by using the horizontal thrust along the direction of the pump axis generated by the rotation of the impeller, so it is also called a horizontal axial flow pump. Mainly used in the evaporation of diaphragm method caustic soda, phosphoric acid, vacuum salt production, lactic acid, calcium lactate, alumina, titanium dioxide, calcium chloride, ammonium chloride, sodium chlorate, sugar, molten salt, paper, waste water and other industries. Concentration and cooling, in order to improve the production capacity of the equipment, increase the heat transfer coefficient of the heat exchanger for forced circulation. Therefore, it can also be called an axial flow evaporative circulation pump.

Forced Circulation Pump,Circulation Pump,Recirculating Pump,Centrifugal Pumps

Jiangsu Qiantu Trading Co., Ltd. , https://www.pumpqt.com