350kVA 280kw Caterpillar Industrial Diesel Generator
MSB Breaker Chisels MSB Breaker Chisels Handan Hanbing Machinery Manufacturing Co.,Ltd , https://www.handanhanbing.com
Δ Specification:
Prime Power (50Hz)
350KVA/280KW
Standby Power(50Hz)
400KVA/320KW
Engine Model
Caterprillar C13
Alternator Model
Caterprillar A2925L4
Controller Moudle
EMCP4.2
Engine Specifications
EngineÂ
C13, In-Line 6, 4-cycle diesel
Compression Ratio
16.3:1
Aspiration
Air to Air Aftercooled
Governor Type
 Adem™A4
Fuel System
Hydraulic electronic unit injection
Bore
5.12 in
Displacement
 763.0 in³
Stroke
6.2 in
Fuel Consumption
100% Load with Fan
72.4L/hr
75% Load with Fan
54.8L/hr
50% Load with Fan
39.0L/hr
25% Load with Fan
23.8L/hr
Cooling System
Engine Coolant Capacity
14.2L
Inlet Air
Combustion Air Inlet Flow Rate
20.3m³/min
Max.Allowable Combustion Air Inlet Temp
44ºC
Exhaust System
Exhaust Stack Gas Temperature
504.3ºC
Exhaust Gas Flow Rate
54.8m³/min
Exhaust System Backpressure(Maximum Allowable)
10.0kPa
Heat Rejection
Heat Rejection to Jacket Water
113kw
Heat Rejection to Exhaust (Total)
249kw
Heat Rejection to Aftercooler
43kw
Heat Rejection to Atmosphere from Engine
47kw
Heat Rejection to Atmosphere from Generator
20kw
Alternator
Motor Starting Capability@30% Voltage Dip79
793 skVA
Current
505 amps
Frame Size
A2925L4
Excitation
SE
Temperature Rise
125ºC
Δ DEFINITIONS AND CONDITIONS
1. For ambient and altitude capabilities consult your Cat dealer. Air flow restriction (system) is added to existing restriction from factory.
2. UL 2200 Listed packages may have oversized generators with a different temperature rise and motor starting characteristics. Generator temperature rise is based on a 40° C ambient per NEMA MG1-32.
3. Emissions data measurement procedures are consistent with those described in EPA CFR 40 Part 89, Subpart D & E and ISO8178-1 for measuring HC, CO, PM, NOx. Data shown is based on steady state operating conditions of 77° F, 28.42 in HG and number 2 diesel fuel with 35° API and LHV of 18,390 btu/lb. The nominal emissions data shown is subject to instrumentation, measurement, facility and engine to engine variations. Emissions data is based on 100% load and thus cannot be used to compare to EPA regulations which use values based on a weighted cycle.
Δ Applicable Codes and Standards:
AS1359, CSA C22.2 No100-04, UL142,UL489, UL869, UL2200,
NFPA37, NFPA70, NFPA99, NFPA110, IBC, IEC60034-1, ISO3046, ISO8528,
NEMA MG1-22,NEMA MG1-33, 2006/95/EC, 2006/42/EC, 2004/108/EC.
Note: Codes may not be available in all model configurations. Please consult your local Cat Dealer representative for availability.
PRIME: Output available with varying load for an unlimited time. Average power output is 70% of the prime power rating. Typical peak demand is 100% of prime rated ekW with 10% overload capability for emergency use for a maximum of 1hour in 12. Overload operation cannot exceed 25 hours per year.
Ratings are based on SAE J1349 standard conditions. These ratings also apply at ISO3046 standard
conditions.
Fuel Rates are based on fuel oil of 35º API [16º C (60º F)] gravity having an LHV of 42 780 kJ/kg (18,390 Btu/lb) when used at 29º C (85º F) and weighing 838.9 g/liter (7.001 lbs/U.S. gal.). Additional ratings may be available for specific customer requirements, contact your Cat representative for details. For information regarding Low Sulfur fuel and Biodiesel capability, please consult your Cat dealer.
Δ TESTING ITEMS
GENLITEC POWER provides a full line of brand new and high quality products. Each and every unit is strictly factory tested before shipment.
√ Parts faults testing
√ Fuel tank pressure testing
√ Bolt tightening torque testing
√ Painting thickness testing
√ Voltage bearing and insulation testing
√ Noise testing
√ Loading Testing(25%, 50%, 75%, 100%, 110% load to check verify that all control systems, alarm and shut-down protection)
Δ COMAPNY OVERVIEW
√ Company name: Genlitec (Fuzhou) Power Equipment Co., Ltd.
√ Value: Power Anywhere Anytime...
√ Business type: Power equipment manufacturer and service provider
√ Founded: 2010 year
√ Products range: Engines, Generators, Water Pumps, Mobile Lighting Towers
√ Professional Team: Genlitec Power technicians and engineers are hard-working and serious with their work. Compliance, standard and process are fundamentals of our high quality products. Members of our products development team are rich in professional skills and familiar with products. With the help of advanced development tools and management platforms, we will always be ready to provide best service to all our customs.
Â
Δ FAQ (FREQUENCY ASKED QUESTION)
Question: What's your warranty period?
Answer: Our payment terms is 1Â year or 1000 running hours whichever comes first. But based on some special project, we can extended our warranty period.
Question: Does your generators has global warranty?
Answer: Yes, most of our products like Cummins, Perkins, Doosan power generator enjoy the global warranty service. And the alternator we use like Leroysomer, Stamford, marathon also enjoy the global warranty service, so you do not need to worry about the aftersales service.
Question: Do you accept OEM/ODM service?
Answer: Yes, we can accept OEM.
Question: What's your payment terms?
Answer: We can accept T/T 30% in advance, and the balance 70% shall be paid before shipment or L/C at sight, L/C deferred payment terms or west union.Â
Question: What's your delivery time?
Answer: Our normal delivery time is 25 working days. But if your order is some special engine and alternator, then the delivery time is longer.Â