Model NO.: EC-RV-12LF
Application: Water Transfer Pump
Industry: Water Treatment
Performance: No Leakage Pump
Theory: Electromagnetic Pump
Open Flow: 12 Lpm /3.17gpm
Built-in Switch: on/off - 0.2MPa/0.45MPa
Pressure Switch Mode: Demand
Voltage: 24 VDC
Customization: Available
Patent Product: Yes
Trademark: E-CHEN
Specification: CE, RoHS
Origin: China
Foshan City Sanjiaozhou Electrical Technology Co., Ltd.
Â
E-CHEN Delivery/Transfer Water Pump RV Series
Independent innovention Patented design
Non-pressure water transfer
Built-in pressure switch
Santoprene Diaphragm
Â
 CE Certificate, RoHS Integration ReportÂ
E-CHEN delivery pumps (also known as demand pumps, dispensing pumps and transfer pumps) are designed for intermittent duty, though most models can be run continuously for hours at a time. Delivery pumps are most commonly used either to pressurize water from an atmospheric tank, to deliver purified water to a specific point of use, or simply to increase water pressure when required.
These diaphragm pumps are controlled by a pressure switch. When required, an integrated bypass can be incorporated to help regulate pressure levels.Â
Â
Materials of Construction: |
Nylon Housing EPDM Valves Santoprene Diaphragm Stainless Steel Fasteners  |
Applications for E-CHEN Delivery/Transfer Pump: |
Water Treatment Reverse Osmosis Beverage Food Service Distillation Equipment Agricultural Spraying General Industrial Automotive  |
Â
Volt: |
24 VDC (12 VDC available)
|
Amps: |
10.0 A |
Flow: |
12.0 L/Min |
Ports: |
1/2″ |
Prime: |
 ≥2 M
|
Recommend Accessories: - E-CHEN 10A transformer
SHIPPING |
Net Weight:2.3 Kg each |
Carton Weight:6 each, 19 Kg |
Carton Size:44 X 34.5 X 32.5 cm |
Â
E-CHEN Delivery Pump RV Series Model
MODEL |
INLET PRESSURE |
OPEN FLOW |
ON / OFF PRESSURE |
VOLTAGE |
RATED CURRENT |
EC-RV-02L |
0 psi |
2 l/m |
0.2 Mpa / 0.45 Mpa |
24 VDC |
≤2A |
EC-RV-03L |
0 psi |
3 l/m |
0.2 Mpa / 0.45 Mpa |
24 VDC |
≤3A |
EC-RV-05LF |
0 psi |
5 l/m |
0.2 Mpa / 0.45 Mpa |
24 VDC |
≤5A |
EC-RV-07LF |
0 psi |
7 l/m |
0.2 Mpa / 0.45 Mpa |
24 VDC |
≤8A |
EC-RV-10LF |
0 psi |
10 l/m |
0.2 Mpa / 0.45 Mpa |
24 VDC |
≤10A |
EC-RV-12LF |
0 psi |
12 l/m |
0.2 Mpa / 0.45 Mpa |
24 VDC |
≤10A |
Paint Stop Filter Media
Paint stop filter media
This filter media is made of long fiber glass with gradual density. Inlet side is green, and outlet side is white. Other names: floor filter, fiberglass media, paint arrestor media ,Paint Collection Filter) is constituted by long-fibre fibreglass stiffened with synthetic resins. These filters enable better dust retention, with a higher accumulation capacity.
Our filtering media is self-extinguishing in Class F1 DIN 53438 and can cope with temperatures of up to 120ËšC. The media cannot be regenerated and, therefore, must be disposed of at the end of its operating life. Resistant to solvents and chemical products, it is used as an exhaust filter for coating booths and as a pre-filter in air-treatment units.
It is supplied in rolls of up to 20 metres in length, of various heights, and in panels.
Low initial resistance
High separation efficiency
Different color on inlet and outlet side
Flexible
Economical and practical
Application: Used in the spray booth or filter mist in the kitchen
Type: Supply slices or rolls size
Media: Fiber glass with gradual density, inlet side is green colour, outlet side is white
EN779 class: G3, G4
Average arrestance: 93%ASHRAE52.1-1992
EUROVENT4/5 class: EU3, EU4
Average separation efficiency: 95%
Final resistance: (suggest) 130Pa-200Pa
Temp. Resistance: 170
Paint Stop Filter Media,Ps-100 Paint Stop,Ps-50 Paint Stop,Fiberglass Paint Stop,Roller tape filter media glass,Glass filtration media,Coalescer media
Hebei Fangyu Trade Co., Ltd. , https://www.laderytrading.com