What kind of wood flooring is used after installing carbon fiber
Zinc Alloy Die Casting of Frame Zinc Alloy Die Casting of Frame have a good surface roughness, strength and elongation, Which are widely used in a variety of ornaments, such as furniture, accessories, door handle ,architectural decoration, bathroom accessories, lighting parts, toys, tie clips, belt buckles, various metal buckle and so on,they are required a good surface treatment performance. Zinc Die Casting Frame, Zinc Frame Ningbo Zhenhai Xinxie Machinery Co.LTD , https://www.xinxie-diecasting.com
1, the floor size is not chaotic, can withstand changes in temperature without damage;
2, no deformation, cracking, thermal expansion and contraction coefficient is small;
3, environmental protection, formaldehyde-free and harmful gas release;
4, is not afraid of water soak the floor (to prevent damage to the ground water pipe damage to the water).
What kind of wood flooring is good for floor heating - Comparison of solid wood flooring and composite flooring
Nowadays, there are many types of flooring on the market, such as solid wood flooring and laminate flooring. In general, laminate flooring is more suitable for floor heating. Since the floor thickness of floor heating is 6.5-8.5mm, the thickness of the composite floor is mostly 6-9mm, of which the reinforced floor is mostly 6-8mm, the three-layer parquet floor is 8-9mm, the heat transfer function is better, and its The surface has a wear layer of aluminum oxide, which is conducive to the rapid diffusion of heat at the surface.
Solid wood flooring is generally about 2cm thick. When installing it, it also needs to use keel. If it is used as floor heating, there is air between the floor and the ground. The heat transfer coefficient of air and wood is very low, so that the heat is not easily transmitted to the surface, which can lead to heat. Overlaying, the surface temperature is not even, the temperature difference feels significant, and the laminate flooring is pressed at high temperature, the internal moisture content is very small, so the floor will not be deformed due to moisture loss. Each layer of multi-layer solid wood flooring is intertwined horizontally and horizontally, pinching each other, and there is also a dense anti-deformation groove on the back surface, which decomposes the stress generated by the heated surface, so the deformation is very small.
Zinc Alloy Die Casting of Frame have their own purposes, need to meet the performance requirements.
(1) mechanical properties, tensile strength, when the material fracture resistance;Elongation, brittleness and plasticity of the measure;Hardness is the resistance of the material surface is pressed into a hard object or friction caused by plastic deformation.
(2) state of the working environment: temperature, humidity, media contact with the workpiece and air tightness requirements.
(3) precision: accuracy and dimensional stability can be achieved.