Dura-Shred Low Cost Milling Machine for Wood Waste

March 21 14:12:19, 2020

  • Model NO.: TSD1663/TSQ1732X
  • Material Processed: Rubber
  • Certification: GMA, QS, UL, FDA, ISO, CE
  • Automation: Automatic
  • Capacity: 5-10t/H
  • Blade Thickness: 40mm-75mm
  • Cutting Chamber L*W: 1304*858
  • Hopper Opening: 2335*1628*770
  • Equipment Dimensions L*W*H: 4280*2206*2492
  • Specification: 37KW*2
  • HS Code: 4001100000
  • Type: Rubber Recycling Machine
  • Knife Type: Piece Knife Crusher
  • Screw: Multi-Screw
  • HP/Kw: 37kw*2
  • Voltage: as Per Customer Request
  • Blade Diameter: 542mm
  • Equipment Weight: 12500kg
  • Product Size Range: 75mm Strips-40mm Chips
  • Trademark: Dure-shred
  • Origin: Wuxi, China
Welcome to Dura-shred company and thank you for your interests in the products:Dura-shred low cost milling machine for wood waste.

Wood recycling plant
At a wood recycling plant, raw material need to be well shredded and milled, then get dried, compressed, and formed into small eraser-sized bits, the wood pellets get from wood recycling plant are clean, pleasant smelling and smooth to touch. This plant can process different type of wood, including wood pallet, tree roots, timber, wood logs etc. For more information, please visit our website;www.dura-shred.cn or: http://dura-shred.en.alibaba.com. Followings are some brief introduction of our main machines:
 
1. shredding process - single/double shaft shredder
 
The single/double shaft shredder is a machine whose purpose is to shred materials into chips. It consists of a single, solid shaft with square blades bolted into it. This shaft rotates at about 74-83 RPM, depending on the model, and these blades pass through a bed knife on the base of the cutting chamber. A hydraulic ram continually pushes the material against the shaft of the shredder for continuous cutting. the output size can reach diameter 50-100 mm then it is pushed to next process to get dried and milled.
 
2. Drying process - Rotary Dryer
 
After shredding process, the wood and biomass material need to be well conditioned on moisture before pelletizing. The best moisture content to pelletizing is about 14-16%. Our rotary dryer is made up of burning stove and main rotary dryer which is high efficiency in drying the wood and biomass material. It use steam to heat air and contact material to remove certain degree of moisture. It is very important for wood pellet plant to using moisture detector which will determine the most suitable moisture before pelletizing.
 
3. Pelletizing process - Wood miller
 
Dura-shred wood milled machine is the heart of the wood recycling plant. The miller is widely used in compacting of wood, straw, other biomass sources into pellet. Capacity ranges from 1T to 10T per hour. After milled, the output size can reach diameter 3-5 mm. we use Siemens motor, zwz bearing, high quality components make the miller more efficient and durable.  
4. Cooling process - Pellet cooling machine
 
After the pelletizing process, the temperature of the wood pellet is about 60-80 degrees Celsius, and the moisture content of the wood pellets is about 15%. A cooler must then be used to reduce the moisture content of the wood pellet to about 3-4%, thereby making the wood pellet easy to store. However, some customers said that the local climate is very humidity, they want to cool the wood pellets with moisture 7-8%. It is no problem, our new stabilizer combined cooler can do it well.
 
5. Packing process - packing station
 
After cooling process, the wood pellets will not directly enter into the fuel process, avoiding the wood pellet affected with damp, the packing process is very necessary. The packing process is effectively handled by our Packing Machine.

Feature
You can see the characteristics and equipment specifications in the forms below.

Competitive advantage of Dura-shred
1,It's designed, scaled, powered, installed, and priced in a way that makes the most sense for your needs.
2,It is in low price.
3,The machine is high output.
4,Strong structure, easy to operate, low electricity consumption & durable.
5,Uses high quality steel material especially for making knives of the shredder, the machine stands long use under severe and continuous service conditions.
6,we have a turnkey service to guarantee your profits and rights.


Company profile
Dura-Shred has been focusing on designing and manufacturing equipment for the recycling industry since 2001 and is emerging as a leader in providing cost effective turnkey tire recycling systems. Our main focus is to provide custom designed tire recycling systems that deliver optimum production for a variety of applications such as TDF (Tire Derived Fuel), rubber mulch, and crumb rubber. We have manufactured and installed recycling systems in countries all over the world, including the US, Canada, Mexico, South America, South Africa, Iraq, and China. These systems are specifically designed and tailored to fit the diverse needs of our global customers.


Our service
1.Pre-sale support
Dura-shred consists of experienced specialists, we will offer a suitable solution according your requirements in time.
2. After-sale service
Dura-shred skilled specialists are available to assist with onsite installation, commissioning & training on request. This will enable customers to optimize the performance of the plant. Customers will be briefed on all aspects relating to operation and maintenance by a specialist. Dimensional drawings together with service requirements will be provided prior to delivery of the equipment. This will allow the customer to prepare the site and allow them to commence production in a timely fashion.
Dura-shred holds a adequately inventory of spare parts and their efficient service personnel will ensure that any required part will be dispatched without delay. Customers are encouraged to hold their own critical spare parts to ensure optimal machine condition and performance.
3. Technical support
Dura-shred provides enough hardware resource no matter large-scale or small-scale production lines, clients can carry out installation, commissioning and acceptance before delivery.
You may be interested in those following questions:
1, I want to know more about your company and your products, how?
Answer: We will sent you a catalogue as well as a questionnaire which covers your requirement. Your kindly reply about filling the questionnaire will be greatly appreciated.
2, Have you ever sold your plant to our country?
Answer: Until now, Our products have been sold to the countries all over the world, such as America, Italy, Poland, India, south Africa, Japan, Pakistan, Columbia and so on.....
3, What is the delivery time?
Answer: it depends on what kind of machine you will buy, usually 2-4 months.
4, Can I go to your company to test those machines?
Answer: We welcome you at any time!!!
5,About our factory, where are we?
Our production plant is located in Wuxi, China, with headquarters in Shanghai, China. We have a modernized factory with an experienced professional work force. Our management team comprises of multi-culture and bi-lingual professionals fluent in English, Spanish, and Mandarin Chinese. Dura-Shred has a turnkey service that allows us to export to all major international ports.

We are almost working for 20 hours, so don't worry about the time difference. You can contact us by email ,Trade manager, Skype, Whatsapp or Phone. We can handle all that.
My connections: Mr.Charles Huang
Cel: 0086-189-3994-5932
Tel: 0086-021-5171-9519



 		 TSD2471(182) TSD1663(137) TSD1651 TSD1347(86) TSD1340 TSD1332 TSD832
Motor Specifications Electric Electric Electric Electric Electric Electric Electric
Number of Motors 2 2 2 2 2 2 2
HP 55KWX2 45KWX2 37KWX2 22KWX2 22KWX2 15KWX2 7.5KWX2
Voltage as per customer request as per customer request as per customer request as per customer request as per customer request as per customer request as per customer request
Cutting Chamber Split Chamber Split Chamber Split Chamber intact Chamber intact Chamber intact Chamber intact Chamber
Large Blade Thickness 75mm 75mm 75mm 40mm 40mm 40mm 40mm
Small Blade Thickness 40mm 40mm 40mm / / / /
Blade Diameter 754mm 542mm 542mm 450mm 450mm 450mm 284mm
Cutting Chamber L*W 1804X1410 1604X858 1304X858 1204X686 1004x686 804x686 804x460
Equipment Dimensions 5876x2310x3493 5464x2624x3040 4280x2206x2492 4092x1416x2163 3892x1416x2163 3327x1030x2075 2796x1256x2311
Equipment Weight 22400kg 13700kg 12500kg 6300kg 5800kg 4700kg 2000kg
Hopper Opening 3711x2438x1046 2835x1628x770 2335x1628x770 1521x1416x695 1321x1416x695 1120x1257x800 1120x1256x800
Capacity 15-20t/h 10-15t/h 5-10t/h 3-5t/h 2-3t/h 1-2t/h 800-1000kg/h
Product Size Range 40mm-75mm 40mm-75mm 40mm-75mm 40mm chips 40mm chips 40mm chips 40mm chips
 

 		 TSQ2147X TSQ1740X TSQ1732X
Motor Specifications Electric Electric Electric
Number of Motors 1 1 1
HP 90KW 45KW 37KW
Voltage as per customer request as per customer request as per customer request
Cutting Chamber LxW 742x1200 580x1000 580x800
Equipment Dimensions LxWxH 2150x2250x2950 1765x1900x2435 1765x1660x2435
Equipment Weight 5600kg 3300kg 2950kg
Hopper Opening LxWxH 895x1434x1160 602x994x916 602x794x916
Capacity 800-1500kg/h 500-800kg/h 300-500kg/h
Product Size Range 1mm-6mm 1mm-6mm 1mm-6mm
Any other requirements or questions about our Dura-shred low cost milling machine for wood waste,be free to contact me!

YL450 Double Cylinder High Pressure Pump

High Pressure Misting Pump,Ultra High Pressure Water Pump,High Pressure Diaphragm Pump,Bosch High Water Pressure Pump

FOSHAN YUANLI PRECISION MACHINERY CO.,LTD , https://www.ylwaterjet.com