The appearance of the Zhongding sampler is quite different from the horizontal format sampler and the electric sampler. This is because the configuration of the Zhongding sampler is completely different. It looks like it is like Is a cone, it is also called a cone divider. Although from the appearance point of view, Zhong Ding-type sampler is very strange, and the operation is also more complicated, but in fact, as long as you are familiar with the structure and use of Zhong-Ding-type sampler, then in fact, you can use the Zhong-Ding-type sampler can be very Well done a lot of seeds of the sample work, the following will briefly introduce the structure and use of Zhong Ding sampler.

1. The configuration of Zhongding separator The Zhongding separator can be divided into three parts from top to bottom. The top is the funnel. The bottom of the funnel is the valve. Below is a cone, and the cone The top is just right in front of the center of the trap. This kind of structure can ensure that the seeds will slide smoothly and help to improve the effect of sample separation. The funnel and the valve are relatively simple. The more complicated structure is the cone, because the cone is divided into several equal parts around the cone, half of which are alternately arranged, and the lower ones are provided with small grooves. The sample will pass through the small groove. Into the inner layer, and then through the small mouth into the splicer, the sample flows into the outside through the small slot, into the big mouth to another splicer, the above is actually the process of dividing the sampling of the ZHONG Ding type.
2. How to Use the Zhongding Sampler Now that you understand the structure and working principle of the Zhongding sampler, it's easier to understand how to use the Zhongding sampler. Before dividing the sample, the first thing is to clean the sampler, keep the interior clean, and close the valve at the same time; the seed sample should be laid after entering the funnel, the outlet should be aligned with the splice device, and the sample should be sprinkled. After doing these preparations, you can quickly open the valve under the funnel by hand. At this time, the seeds will fall rapidly under the influence of gravity. After the cones are evenly dispersed into the compartments, they will finally fall into the bottom. In the two sample holders, the seeds were divided into two.

Type 05 Pn6-Pn40 is blind flat flange, pressure PN6-PN40, standard is EN1092-1, and we produce ANSI, JIS, EN, DIN flanges. We grant our buyers with our strict quality control system and good serivce. In addition, we also do the United States, Japan, Britain, Germany, the series of products. won a lot of customer recognition, over the same period the company won three national patents.

TYPE 05 PN6-PN40

Type 05 Pn6-Pn40,Type 05 Blind Flange,Type 05 Carbon Steel Forged Flange

Jinan HeChuang Mechanical Manufacturing Co., Ltd. , http://www.hechuangmechanical.com