What new car insurance should buy
For the owners of new cars, in addition to major accidents, they will also buy some commercial insurance for their cars so that they can be prepared. Faced with the complicated and complicated insurance in the insurance market, what are the new car insurance worth buying? Take a look at the answers of professionals. First, from the perspective of the type of insurance purchased. For the new car, in addition to the necessary strong insurance, it is also recommended that you buy such insurance: scratch insurance, third party liability insurance, excluding insurance and loss insurance, vehicle damage insurance, stolen emergency insurance. These insurances are very necessary for a new car, such as scratch insurance, we may only need three hundred to four hundred yuan for insurance, but if the vehicle scratches can get more than one thousand yuan compensation, and scratches For the new car, it has a greater impact, so it is worth buying. In addition to waiving exemption and insurance, in the event of a crash, this insurance can be used to obtain a full amount of claims, and it is not necessary to pay for the repairs themselves. From the point of view of the new car, some insurance should be purchased as much as possible, which is beneficial to both the vehicle and the owner. Second, from the perspective of the selection of insurance companies. We can purchase insurance for vehicles that can be purchased from insurance companies and can be purchased at the 4S shop where the car is purchased. There can also be different company choices for purchases at insurance companies. From the perspective of insurance expenses, it is not recommended that you buy from 4S stores because the cost is relatively high. Although they can provide professional maintenance services for vehicles, it is still not worthwhile. If you buy from an insurance company, it is recommended that you choose an insurance company with good reputation and good reputation to buy, so that when you claim compensation, it is easier. At the same time, it is better to buy strong insurance and commercial insurance in the same insurance company, which will save a lot of unnecessary trouble. Third, from the point of view of the purchase amount. Some owners think that the bigger the purchase, the better, but the premium we have to pay is even higher. We can consider the amount of insurance coverage in this way. The 130,000 high-risk insurance can meet the basic needs. If the accident happens to be a high-end car, at least 300,000 third-party liability insurance should be added. If there is any other demand, You can also buy around 200,000 insurance, so you can get better protection.
Intergrated Design Batch Waste Plastic Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.
Flowchat of Batch Waste Tyre Pyrolysis Plant
Advantages of Batch Waste Tyre Pyrolysis Plant
1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.
2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.
3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.
4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.
5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.
6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.
8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.
Technical Parameter of Batch Waste Tyre Pyrolysis Plant
NO.
ITEM
PROJECT
1
Equipment Model
XY-7
XY-8
2
Door Model
Full Open Door
Full Open Door
3
Suitable Raw Materials
Rubber/Plastic Products
Rubber/Plastic Products
4
Structure
Horizontal Type Revolves
Horizontal Type Revolves
5
Reactor Size
Φ2200*6000mm Φ2600*6600mm
Φ2200*6000mm Φ2600*6600mm
6
Capacity for One Batch
5-6Mt; 8-10Mt
5-6Mt; 8-10Mt
7
Oil Yield of Tires
40%-45%
40%-45%
8
Work Pressure
Normal Pressure
Normal Pressure
9
Reactor Rotation Speed
0.4R/M
0.4R/M
10
Fuels Choice
Coal, Wood
Coal, Wood, Gas, Oil
11
Power
18KW/H
18-25KW/H
12
Cooling Method
Water Cycling
Water Cycling
13
Type of Drive
External Annular Gear
External Annular Gear
14
Heating Method
Direct
Direct
15
Type of Installation
With Foundation
With Foundation/Integrated Base
16
Noise dB(A)
≦85
≦85
17
Operation Mode
Intermittent Operation
Intermittent Operation
18
Total Weight(MT)
25-40
25-40
19
Installation Space Required
30m*10m
30m*10m
20
Manpower
3~4/batch
3~4/batch
21
Shipment
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Integrated Design Batch Waste Plastic Pyrolysis Plant Intergrated Design Batch Waste Plastic Pyrolysis Plant,Waste Plastic Pyrolysis Plant,Rubber Pyrolysis Recycling Plant Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl