There are many reasons why the brakes of the medical waste transfer vehicle fail to work during the daily driving process. For example, the vacuum booster pump fails, there are too many impurities in the brake master cylinder, or the seal is not strict, and the piping interface and gas storage Any leak in the tank will cause the brake to fail. The most common failure of the brake is the improper operation of the driving mechanism, which leads to the failure of the mechanism. Under long-term friction and heat generation conditions, the brake will appear to be charring, which will completely disable the brake function. What should happen to the sudden failure of the medical waste transfer vehicle during driving?

1, according to the road conditions and the direction of speed control, release the high speed gear, at the same time can be a very quick boom of empty oil, high-speed gear change low gear, so the engine will have a larger traction resistance The speed will be reduced immediately.

2, in the downshift, it should be combined with handbrake, but when using the handbrake should be careful not to pull too tight, can not pull too slow, if pulled too tight, Then there is a possibility that the transmission member will eventually lose its ability to brake. Pulling too slowly will also cause the disc to wear and burn and lose braking performance.

3. The friction and collision between the steel parts of the medical waste transfer car's compartments, bumpers, etc. and the trees, rocks, and earth slopes make the medical waste transfer vehicle achieve a purpose of forcible parking off line, and it can also be as far as possible. Reduce the loss of accidents.

4. If the medical waste transfer vehicle has experienced a brake failure while climbing uphill, it should be reduced to mid-range or resisted when it should be adapted. Can ensure that there is enough power to drive the vehicle to the top of the slope to park. If it is necessary to park on a half slope, then it is necessary to maintain a forward low position and tighten the hand brake. The occupants can use rocks or wooden blocks to hold the wheels. . (Text / Sun Ni)

Oxygen Analyzer  is used to test the oxygen purity in gas flow.  It is an intelligent measurement instrument, which adopting advanced ion current oxygen sensor with single chip technology.  It has been widely used in the fields of nitrogen separation from air, fertilizer, petrochemicals and biological fermentation.

Oxygen Analyzer Product Features                                                                                                   

* New pattern long-life conversion ion current tester with fast response and high sensitivity

* N2 or O2 concentration display

* Checking the sensor working state automatically and unique double-line working change mode extending the sensors life

* Setting alarm value freely

* High precision, automatic temperature compensation, eliminating the impact of environmental temperature

Oxygen Analyzer

Oxygen Analyzer,Oxygen Gas Analyzer,Online Oxygen Analyzer,Portable Oxygen Analyzer

Shandong Gamma Gas Engineering Co. Ltd. , https://www.gammagas.com