Corrugated Metal Roofing Sheet Roll Forming Machine
Conveyor pulleys are the main elements providing the transmission of torque from the drive and ensuring that belts remain taught. As per international standard design and manufacturing technology, there are Head Pulley , tail pulley and Bend Pulley . Conveyor pulleys are often lagged with rubber to improve the friction between the drive pulley and the belt. Conveyor Pulleys are used to transmit the drive power into the conveyor belt and as such, are subjected to the dynamic belt tension forces in a conveyor.
There are a number of different types of pulleys available for use on conveyors as well as different design parameters for pulleys serving different functions on the same conveyor.
Drive Pulley: Transmit the power with the contact force between the belt and the surface of the pulley
Snub Pulley: The purpose of the Snub Pulley is to wrap the belt further around the drive pulley to improve the transmission of the driving force, and to eliminate belt slip.
Bend Pulley: Changes the direction of a belt
Take-Up Pulley: Generally attaches to a weigh and maintains proper
Tail Pulley: Turns freely, which is located at the tail end of the belt conveyor
Special: XKTE supplies both high-quality Conveyor Components and Professional bearings.
XKTE Roller Bearing- running - in material handling bulk conveyor system.
Types and arrangement of pulley bearings
The bearings are self-aligning relative to their raceways, which means that the bearings can be 'misaligned' relative to the shaft and plummer blocks, to a certain degree. In practical terms this implies that the bending of the shaft under loaded conditions as well as minor misalignment of the pulley support structure, can be accommodated by the bearing.
1. Bearings used for conveyor pulleys are generally spherical roller bearings, chosen for their radial and axial load supporting characteristics.
2. Self-aligning Ball Bearing
Conveyor Pulley,Conveyor Drum Pulley,Belt Conveyor Pulley Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl
1.Machine List
Machine list
Â
Â
Â
Â
Â
5 ton hydraulic de-coiler (optional)
1 set
Main roll forming machine
1 set
PLC Control box
1 unit
Hydraulic station
1 unit
Servo following cutting
1 unit
Out table
2 units
1.Technical process
Uncoiling-Feeding with guide--Roll forming-Cutting-Products collecting
Â
1.Un-coiler: 5 ton hydraulic
2.De-coiling Holder: about 1500mm×1500mm×1700mm
3.Insider diameter of the un-coiler: 508-610mm
2)Roll forming machine:
1.Roll Forming Machine: RF-RP
2.Rolling Speed: 25-35m/min(cutting time is not include)
3.Steel sheet Thickness: 0.3-0.8mm color painted sheets, steel
4.Coil width 914mm
5.Control System: PLC Panasonic
6.Roller Stations: about 20 stations
7.Roller Material: 45# forge steel, coated with chrome
8.Shaft Material and DIA:¢75mm,material is 45# forge steel, Chrome with quenching
9.Maim Motor Power: 5.5kw Anhui wannan Brand
10.Hydraulic Pressure: 12Mpa
11.Material Of The Stations: Wall plate thickness 16mm
12.Tolerance: +1.5mm
13.Power supplier:220V, 60HZ,3 phase
14.Way Of Drive:1.2 inch single chain
15.Color Of The Machine :blue
16.The size of the forming machine:8000*1500*1000mm
17.Machine weight: about 6 tons
18.Angle accuracy: +-1degree
3)Cutting:
1.Cutting motion: Â Servo following cutting
2.Material of blade: CR12 with heat treatment
3.Length measuring: Automatically
4.The cutting thickness: 0.3- 0.8mm
5.Hydraulic Station Power: 4 KW
4.)Out table:
Size:4000*1350*1000mm
5)Control Box:
Electrical control system part, Yaswaka Japan Brand
1.Power supplier: 380 V, 50 Hz, 3Phase (adjusted with the requestment)
2.length & quantity measurement automatically;
3.length & quantity controlled by PLC,
4.Length inaccuracy can be amended easily.
5.Control panel: Button-type switch and touch screen
6.Unit of length: millimeter (switched on the control panel)
 FAQ
1)Q:Can you make machine according to my design?
  A:Yes, we have experienced technical team to work out the suitable design for you and confirm with you until you agree.
2) Q: Will you deliver the right goods as ordered? How can I trust you?
  A: Yes, we will. The core of our company culture is honesty and credit.
3)Q:What payment terms you accept?
  A:Commonly is TT, 30% deposit and 70% before shipment, and sometimes we can consider more for you as per your request.
4) Q:What is the warranty for our machine?
  A:We have one year guarantee, and provide whole life's technical support.
Â
Â
