"Double Flash" must not be opened with care and will be deducted by three points
Cable tray forming machine not only can be set up independently in buildings, but also can be attached in a variety of buildings (structure) on building and pipe rack bracket.
It has simple structure, beautiful shape, configuration flexibility and easy maintenance.
Specifications:
Decoiler - Leveling - Feeding guide - Power press - Main roll forming machine - PLC control system - Hydraulic cutting - Receiving table
Pictures of machine:
Training and Installation : Cable Tray Roll Forming Machine Cable Tray Roll Forming Machine,Metal Cable Tray Roll Forming Machine,Steel Cable Tray Roll Forming Machine,Cnc Cable Tray Roll Forming Machine YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn
Danger warning flash, generally we call "double flash" or "double flash", its role is to remind other vehicles and pedestrians to pay attention to the special situation of the car's signal lights, because of its role is very important, so this "double flash "There are relatively strict rules and penalty points will be used as punishment.
When should the double flash be turned on?
1. The team that is allowed by the traffic police department must be a team that has declared and allowed the traffic police department to use the double flashing lights while driving, and the teams that have not applied for approval (wedding fleet, self-driving tour team, etc.) are used in driving. Double flashing behavior is not allowed by law.
2. When the vehicle malfunctions during a road trip, the vehicle suddenly malfunctions and cannot be moved to a safe area in time. Immediately turn on the hazard warning flash to remind the passing vehicles and pedestrians to pay attention to safety, and promptly report an alarm and wait for rescue.
When the vehicle on the highway fails, it shall stop in the emergency parking zone, turn on the hazard warning flashlight immediately, and set the danger warning sign 150 meters away from the rear of the fault vehicle, and promptly report the alarm to the driver. Outside the front fence waiting for help.
3. Traction of faulty motor vehicles When towing a faulty motor vehicle, the vehicle is in an abnormal state at this time. Both the tractor and the tow vehicle should turn on the hazard warning flash at the same time to remind the attention of passing vehicles and pedestrians, especially the rear driving. Vehicles, to avoid rushing beyond the direction of crossing or not to maintain the necessary safety distance, causing dangerous situations.
3. When transporting emergency patients for rushing emergency patients, the headlights shall be turned on immediately, at the same time, the hazard warning flash light shall be turned on, and the warning signal shall be turned on at a proper time. A special sign shall be clearly visible outside the vehicle to remind the safety of passing vehicles and pedestrians. note.
4. When a sudden rainstorm occurs during driving, it suddenly hits a heavy rainstorm. No matter whether it is daytime or dark, it is particularly dark and rainy. If you want to stop, you should turn on the hazard warning flash immediately to remind the safety of passing vehicles and pedestrians. , draw attention. Landlord you do not belong to this kind of situation Kazakhstan, you are driving while driving double flash, not open parking double flash ah! There are differences and differences, your husband made a point!
5. Emergency failure during driving When a brake malfunctions while the vehicle is moving, because the vehicle cannot be quickly and effectively stopped, the headlight should be turned on immediately, and the hazard warning flash light should be turned on to remind the safety of passing vehicles and pedestrians. Minghao, draw attention, take the necessary files or safety remedy.
6. When temporarily stopping on the road during temporary parking on the road, especially when parking on non-motorized roads or through roads, the hazard warning flash should be turned on immediately to remind the safety of passing vehicles and pedestrians. The driver should not leave the vehicle casually.
7. When a traffic accident occurs in a vehicle in a traffic accident, the hazard warning flash should be turned on immediately to remind the passing vehicles and pedestrians to pay attention to safety, and promptly report an alarm and wait for rescue or treatment.
8. Special missions are being performed When the vehicle receives a temporary emergency service, due to the urgency of time and the tight schedule of the official business, when the acceleration is required, the hazard warning flash should be turned on to remind the passing vehicles and pedestrians to pay attention to safety, attract attention, and avoid them in time.
9. When the vehicle reverses or turns around in a complex road section when the vehicle is reversing or turning around, it shall turn on the hazard warning flash to remind the passing vehicles and pedestrians to pay attention to safety and attract attention.
10. When the vehicle needs to travel at high speed when driving at a high speed, when there is a special reason to continuously overtake the preceding vehicle or when continuously changing lanes, a hazard warning flash should be turned on to remind the traveling vehicle to pay attention to safety and timely avoidance.
When motor vehicles are blocked on the highway in front of the traffic, they should queue up in front of the vehicle and immediately turn on the hazard warning flash to prevent rear-end collisions.
It should be pointed out that the double flashing lights can be turned on at the same time when the above conditions are met (for example, double flashing lights do not need to be turned on for normal rainy days). After all, the double flashing lights of most vehicles will shield the function of the turning lights (of course, there are also turning lights. The vehicle with the priority function) makes it impossible for the rear vehicle to accurately determine the driving state of the preceding vehicle, which has a certain influence on driving safety.
to sum up:
When using the dual flash, we must not only consider our own safety, but also worry about whether it will affect the normal driving of others. We will run in the middle of the road like a turtle speed, holding a phone in the hands of a double flash and chatting. This is not worth promoting. Only everyone is civilized and the small partners have to develop good driving habits. This will make the entire car environment better and the accident will be able to stay away from us. Otherwise, in accordance with the provisions of the law of our country, if a vehicle fails on the road or the vehicle is parked after the accident, if the lights and warning signs are not used as specified, a penalty of 3 points may be imposed on the motor vehicle driver.
Matching material
Galvanized or PPGI, Aluminum
Material thickness range
0.8mm-2.0mm
Forming speed
2m/min(include punching and cutting time)
Hydraulic station power
22KW
Rollers
20(according to drawings and size)
Shaft material and diameter
80mm, material is 40Cr
Material of the body
400H steel
Wall panel
20mm, Q195 steel(all with electrostatic spraying)
Controlling system
PLC
Material of rollers
45# steel with chromed or Cr12(you can choose the material as your request)
Material of blade
Cr12 mould steel with quenched treatment 58-62℃
Work process:
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantage:
1. Short delivery period.
2. Effective communication
3. Interface customized.