Ito gasoline generator lubricant selection considerations
November 21 18:05:31, 2021
The lubricating oil used for the gasoline engine of the gasoline generator set shall be CF grade oil as specified in GB11122. For users in non-cold areas, No. 40 engine oil can be used regardless of the season, which is beneficial for improving the lubrication conditions of gasoline engines, reducing machine wear and extending the service life. For users in severe cold regions, special thickening oil with a lower freezing point should be used. The recommended grades are: When the minimum ambient temperature is -15°C, 20W-40 oil should be used. When the minimum ambient temperature is -20°C, 15 W-40 oil should be used. When the minimum ambient temperature is -25°C, 10W-40 oil should be used. When the minimum ambient temperature is a 30°C, 5W-40 oil should be used when the minimum ambient temperature. At -35 °C, oil OW-40 should be used.
Gasoline generator lubricant
Lubricant change cycle
(1) The first time the new gasoline engine is replaced, the engine oil should be stored for 60 hours after the completion of the running-in period.
(2) Under normal use, it is replaced every 200h~250h operation. If the conditions of use are good, it can be extended to 300h~350h+ and replaced once. The engine oil should be released under the condition of the gasoline engine heat engine of the generator set , for example, immediately after stop. replace.
(3) Non-mandatory lubrication type high pressure oil pump, before every shift is used, the oil level in the fuel pump governor must be checked. When the oil level is lower than the required standard, it must be added in time; after the oil pump runs for lOOh, it should be replaced in the high pressure oil pump. Oil, clean fuel filter.
Related reading :
Shanghai Ito Power Co., Ltd. Main : Ito Gasoline Generator , Ito Diesel Generator , Ito Small Pump , Ito Digital Generator , Ito Electric Welding Machine
Shinyfly offers the broadest range of automotive, truck, and off-road vehicle fuel-line Quick Connectors on the market. Our QCs adapt to any connection situation from fir tree or olive barb to friction welding for reduced permeation and a more robust connection. They are available in a wide range of materials to meet OEM-specific requirements, compatible with gasoline, diesel, and biofuels, and are compliant with the SAE J2044 tube end form standard.
Fuel Quick Connector, Auto Quick Connector, Plastic 2-Button Quick Connector
Linhai Shinyfly Auto Parts Co.,Ltd. , https://www.chinashinyfly.com